Chemours Industrial Non-Stick Coatings
Orion Industries is a Licensed Industrial Applicator (LIA) of Chemours Teflon™ industrial coatings that are cured to a tough, inert finish. Over the years, Chemours technology has extended the family of industrial Teflon™ coatings to ensure a finish with the ideal combination of properties to meet most design needs. Chemours offers PFA, FEP, Krytox™, ETFE, Tefzel™ and other non-stick industrial coatings.
Teflon™ PTFE Coating Specifications
By combining heat resistance with almost total chemical inertness, excellent dielectric stability, and a low coefficient of friction, PTFE coatings offer a balance of properties unbeatable by any other material. It is the original nonstick finish. Chemours, the originator of industrial Teflon™ coatings, has the worldwide resources to help you solve your industrial coating problems.
- 420G - 100 Series
- 420G - 703 Series
- 459G - 800 Series
- 850G - 204 Series
- 850G - 300 Series
- 851G - 200 Series
- 852G - 200 Series
- 855G - 100 Series
- 857G - 100 Series
- 857G - 200 Series
- 857G - 500 Series
- 958G - 200 Series
- 958G - 400 Series
- 959G - 200 Series
- Krytox™
Teflon™ PFA Coating Specifications
PFA powder topcoats offer excellent release and abrasion resistance. PFA has a very high temperature resistance of 500° Fahrenheit continuous and 500° F intermittent. PFA can be applied in multiple coats to get film builds as high as 8 mils (.008").
- 532G - 5000 Series
- 532G - 7000 Series
- 532G - 7400 Series
- 532G - 9000 Series
PFA liquids are water-based PFA coatings that can be used in applications that PFA powder may not easily coat. It provides a thinner film than powder, up to 3 mils (.003") are possible in multi coats.
- 858G - 200 Series
Teflon™ FEP Coating Specifications
FEP powder topcoats are designed for industrial applications requiring low or no porosity and chemical resistance with a high level of release and non-stick characteristics. FEP can be applied up to a film build of 6 mils (.006") with multiple coats. The maximum operating temperature is 300° Fahrenheit continuous and 358° F intermittent.
FEP liquid topcoats perform similar to powder topcoats with film builds up to 3 mils (.003") with multiple coats.
FEP one coat finishes offer dry lubrication and non-stick properties at relatively low cure temperatures. These one-coat systems are suitable for use in conditions of mild abrasion, low operating temperatures and moderate chemical resistance applications. The coating is normally applied at .5 - 1.0 mils (.0005 - .001") and can be multi-coated to a film build of 1.5 - 2.0 mils (.0015 - .002") to improve corrosion or chemical resistance.
- 532G - 1000 Series
- 532G - 8000 Series
- 856G - 300 Series
- 856G - 400 Series
- 953G - 400 Series
- 954G - 300 Series
MORE
Teflon® is a registered trademark of Chemours and is used under license by Orion Industries, Ltd.